Automec - Brake Pipe sets


Ready-Made Brake Pipe Sets Easily fitted - Will not rust!
Copper or copper nickel brake pipe sets tailored to fit specific vehicles right or left hand drive. Each pipe cut to the correct length, fitted with solid brass unions, and marked for easy fitting. Pipe fitting clips and brass in-line connectors supplied where necessary. Individual brake pipes, clutch, reservoir, vacuum and oil pipes are also available. Sets can also be made to customer specification. Individual Ready Made Brake Pipes

Single pipes available from 4" to 300" in all diameters and union combinations to suit all vehicles right or left hand drive. Detailed brake pipe specification manual and telephone advisory service available to all our stockists.



Brake pipe flaring tools

Ultra-Light

A universal automotive brake pipe flaring tool that produces all SAE and DIN flares as well as the special flares used by Citroen and Rolls-Royce. Vice mounted with nothing to set or adjust, pipe positioning is automatic and there is a fail-safe method for locating the unique hardened and wedge-shaped clamps. Different part numbers are used to determine the punch and clamp sets supplied with each tool. All sizes are available from 3/16" (4.75mm) to 1/2" (12mm) including 3.5mm, 4.5mm and 6.35mm Citroen and Rolls Royce. Available in a range of colours and own branded if required. Minimum order quantities will apply. Weight approx 5.5kgs.

Universal-Light

Similar to the Ultra - Light, but designed for more regular use. Weight approx 7kgs.

Universal-Heavy

Much the same tool as the Universal Light, but designed for extra durability and constant use with the larger pipe diameters up to 1/2" (12mm). Again Universal because it is able to produce flares for all SAE and DIN vehicle brake pipes including the special ones used by Citroen and Rolls Royce. Vice mounted, with nothing to set or adjust, this tool will last indefinitely whilst producing consistently good flares. Different part numbers are used to determine the clamp and punch sets supplied with each set, all sizes are available from 3/16" to 1/2" (3.5 to 12mm). Pipe positioning is automatic and there is a fail-safe method for locating the unique hardened and wedge-shaped clamps. Gross weight approx 9kgs.

Semi-Automatic

Similar to the Universal, with many of the same features-but faster since it is lever operated. Ideally this tool should be bench mounted but it can be vice mounted. All Universal clamps can be used in this tool with exception of Citroen. Gross weight approx 9kgs.

Automatic

The fastest flaring tool in our range, this tool will perform best if bolted down to a workbench allowing the handle to drop free. The tool features a unique method for automatically lining up, clamping and releasing the flared pipe. Able to produce pipes in less than 15 seconds, this tool will appeal to the serious pipe producer. In addition to the standard SAE and DIN flares, the Automatic can now be used to produce Citroen pipes, the flares for air conditioning, power steering and similar auto application pipes using our new 'Adaptor' kit. Gross weight approx.10kgs

Adapta-KIT

For use with the Automatic to enable it to produce many special flares used in the automotive industry including air conditioning, power steering and other similar applications. Special clamps and punches can be made to enable customers to manufacture pipes to their specific requirements.

General

The heaviest duty flaring tool in our range, the General will produce flares for all car and van brake pipes, fuel lines, power steering pipes and similar applications. Vice or bench mounting. Very heavy duty for hard usage and extremely long service. Supplied unboxed. Weight approx. 10kgs.


Pipe Benders

000113 Large Pipe Bender

For all tubes from 11mm to 16mm. A hand or vice mounted tool that will bend tubing up to 180° without kinking.



000111 Medium Pipe Bender

This hand held or vice mounted tool will bend pipes from 3/16" (4.75mm) to 3/8" (10mm) o.d., through a radius of 3/4" to 1 1/4". For automotive, air-conditioning, refrigeration and plumbing, using steel, copper or brass tubing.


000160 Small Pipe Bender

This small hand held clamp/bending tool allows neat, small radius bends to be made on 3/16" steel, copper nickel and copper brake piping. Also for use as a pipe clamp with Oakes deburrer.